Fishing QuestionsCategory: Fishing Reel FAQHow to clean Shimano Curado fishing reels?
Brren SS asked 2 years ago

6 Answers
Alex – ProFisherman Staff answered 2 years ago
Complete is quite a complicated process at home. Small things done, you can’t mix up assembly and tightening forces, selection of solvents, drying and final lubrication of parts. Often fishermen do this in shops. Cleaning is necessary at least 2 times a year with medium intensity fishing (once a week). The Shimano Curado reel requires standard maintenance for a technician.

 

Martin Staff answered 2 years ago
Sand, dust and dirt will always be the enemy of the angler. How many of them have ruined fishing gear and caused nervous emotions in the fisherman, when something breaks or jams, there is wear and looseness. Every fishing store has its own tackle cleaning and repair shop (rings, repair of broken rods). Remove small dirt from the Shimano Curado fishing reel by yourself is a bit difficult.

Bernard answered 2 years ago
Here are some tips on cleaning Shimano Curado fishing reels:

1. Keep the reel clean and free of sand, dirt, and other debris. This will prevent the parts from wearing down prematurely.

2. Use fresh water to rinse off the reel after each use in salt water. This will help to remove any corrosive salt deposits.

3. Lubricate the moving parts regularly with a quality reel grease or oil. This will help to keep the parts lubricated and working smoothly.

4. Occasionally disassemble the reel and clean all of the parts individually. To do this, simply follow the manufacturer’s instructions carefully.

5. Reassemble the reel following these same instructions. Make sure that all of the parts are clean and dry before reassembling.

Carlos answered 2 years ago
Shimano Curado fishing reels are some of the best in the business. They’re built tough and can take a beating, but they also require some maintenance to keep them running smoothly. Here’s a step-by-step guide on how to clean your Shimano Curado fishing reel.

1) Begin by removing the spool from the reel. Depending on your model of Curado, there may be a release button on the side or back that you’ll need to depress before pulling the spool out.

2) Once the spool is removed, take a look at all of the moving parts. You’ll want to pay close attention to the gears, as these are what will need to be lubricated later.

If there’s any dirt, sand, or debris on the gears, use a soft brush to remove it. A toothbrush works well for this.

Once the gears are clean, set them aside and move on to cleaning the rest of the reel.

Reels can be cleaned using fresh water and mild soap. Simply rinse off the reel, being sure to get any soap out of the crevices. A soft cloth can be used to dry the reel before moving on to the next step.

Now it’s time to lubricate the gears. This is an important step, as it will help keep your fishing reel running smoothly. Apply a small amount of lubricant to the gears, being sure to get in all of the nooks and crannies.

Now reassemble your fishing reel by following the manufacturer’s instructions. Once it’s all back together, give it a try and see how smoothly it runs. With proper care and maintenance, your Shimano Curado fishing reel will last for years to come.

David answered 2 years ago
If you’re the owner of a Shimano Curado fishing reel, you’re likely well aware of how great this piece of equipment is. Of course, even the best fishing reel needs a little bit of maintenance from time to time – and that’s where we come in. Here are a few tips on how to keep your Shimano Curado fishing reel clean and in good condition:

The first step is to remove any line that’s currently on the reel. Once that’s been taken care of, use a mild soap and warm water to clean the exterior of the reel – taking special care not to get any water inside of it. Next, lubricate the gears with a quality fishing reel oil or grease.

Wilson answered 2 years ago
If you’re like most Shimano Curado owners, then you probably take great pride in keeping your reel looking and performing its best. Fortunately, cleaning your reel is a fairly simple task that only takes a few minutes to complete.

Here’s a step-by-step guide on how to clean your Shimano Curado fishing reel:

1. First, disassemble the reel by unscrewing the side plate and taking off the spool. Be sure to keep all of the small parts organized so you’ll know where they go back when it’s time to reassemble the reel.

2. Next, use a brush (toothbrush or small paintbrush) to remove any dirt, sand, or debris from the gears. Once the gears are clean, set them aside and move on to cleaning the rest of the reel.

Reels can be cleaned using fresh water and mild soap. Simply rinse off the reel, being sure to get any soap out of the crevices. A soft cloth can be used to dry the reel before moving on to the next step.